MoRadio's Blog - Blog with us.
ICOM IC-F5061D IC-F6061D Digital Mobile Radio
Our Price: $600.00
ICOM IC-F5061D IC-F6061D Digital Mobile Radio General Frequency range IC-F5061 IC-F6061 136–174MHz 400–470MHz, 450–512MHz Number of channels 512 channels/ 128 zones Channel spacing 12.5/25kHz, 15/30kHz 6.25kHz (option) PLL channel step 2.5kHz, 3.125kHz Antenna impedance 50Ω Operating Temp. range –30°C to +60°C –22°F to +140°F Power supply requirement 13.6V DC nominal Current drain (approx) Tx Rx 50W/45W 14.0A Max. audio 1200mA Stand-by 300mA Dimensions (W×H×D) (projections not included) 160×45×150 mm 65⁄16×125⁄32×529⁄32 in Weight (approx.) 1.31kg; 2.9lb Transmitter Output power (approx) 50W (VHF) 45W (UHF) Max. frequency deviation ±5.0/2.5kHz (Wide/Narrow) Frequency error ±1.0ppm Spurious emissions 75dB typ. FM Hum and Noise 45/40dB typ. (Wide/Narrow) Adjacent channel power 70/60dB min. (Wide/Narrow) Audio harmonic distortion 3% typ. (40% deviation) Modulation limiting 70–100% of Max. deviation Ext. microphone impedance 600Ω (8-pin modular) Receiver Sensitivity (12dB SINAD) 0.25μV typ. Squelch sensitivity 0.25μV typ. (at threshold) Adjacent channel selectivity 85/75dB typ. (Wide/Narrow) Spurious response 90dB typ. Intermodulation 77dB typ. Hum and noise ratio 50/45dB typ. (Wide/Narrow) Audio output power 4W typ. at 10% distortion with a 4Ω load External speaker connector 2-conductor 3.5 (d) mm (1⁄8″) /4Ω Applicable U.S. Military Specifications The IC-F5061/F6061 and RMK-3 have been tested to and passed the following MIL-STD requirements and strict environmental standards. Standard MIL 810 C MIL 810 D MIL 810 E MIL 810 F Method Proc Method Proc Method Proc Method Proc High Temp. 501.1 I 501.2 I, II 501.3 I, II 501.4 I, II Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4 I, II Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I Rain Blowing* 506.1 I 506.2 I 506.3 I 506.4 I Rain* 506.1 II 506.2 III 506.3 III 506.4 III Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4 – Vibration 514.2 VIII, X 514.3 I 514.4 I 514.5 I Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV 516.5 I, IV * Rain blowing and drip tests were performed on the controller and RMK-3 only. Measurements made in accordance with EIA-152C/204D, TIA-603. All stated specifications are subject to change without notice or obligation. Supplied Accessories Hand microphone, HM-148 Microphone hanger Key assign stickers DC power cable Mounting bracket kit
General
Frequency range
IC-F5061
IC-F6061
136–174MHz
400–470MHz, 450–512MHz
12.5/25kHz, 15/30kHz
6.25kHz (option)
–30°C to +60°C
–22°F to +140°F
Current drain (approx)
Tx
Rx
Dimensions (W×H×D)
(projections not included)
160×45×150 mm
65⁄16×125⁄32×529⁄32 in
50W (VHF)
45W (UHF)
Adjacent channel selectivity
4W typ.
at 10% distortion with a 4Ω load
2-conductor 3.5 (d) mm (1⁄8″) /4Ω
The IC-F5061/F6061 and RMK-3 have been tested to and passed the following MIL-STD requirements and strict environmental standards.
* Rain blowing and drip tests were performed on the controller and RMK-3 only.
Measurements made in accordance with EIA-152C/204D, TIA-603. All stated specifications are subject to change without notice or obligation.
Need help? We're here to help you. Call us toll free at 1-888-681-8863 or click below to chat.
Categories
MoRadio's Blog 
Information
Special Offer
Today's Special
Newsletter
